Back to top ↑
Logo Bronkhorst USA

ES-FLOW™ series

World's smallest ultrasonic
liquid flow meter/controller

Learn more about the ES-FLOW

Low-Flow Ultrasonic Liquid
Flow Meters / Controllers

ES-FLOW are Volumetric Liquid Flow Meters/Controllers for very low flow ranges. The instruments operate on an innovative measuring principle, using ultrasound in a very small, straight tube. A wide range of liquids can be measured independent of fluid density, temperature and viscosity.

Lowest range 4 ... 200 ml/min
Highest flow approx. 1500 ml/min, depending on e.g. the available pressure drop.

Due to the combination of a straight sensor tube with zero dead volume, self-drainability, orbital TIG-welding and hygienic connections, this flow meter can be used for hygienic applications. Wetted parts are made of stainless steel, except for the rubber gaskets at the Triclamp or flange connections. The exterior design is according to IP67. For non-hygienic applications, the instruments can also be equipped with compression type fittings.

The user interface is a capacitive touchscreen with a TFT display to operate and readout the instrument.

Flow control
The on-board PID controller of the flow meter can be used to drive a control valve or pump, enabling users to establish a complete, compact control loop.

  • Innovative sensor with fast response time and high accuracy
  • Low pressure loss due to the straight stainless steel tube
  • Dosing with integrated PID controller
  • Direct volume flow measurement, independent of fluid properties
  • Hygienic design with capacitive touchscreen
  • IP67 rating and CIP cleanable
Bronkhorst USA - Footerlogo


57 South Commerce Way
Suite 120
Bethlehem, PA 18017

Phone: +1 610 866 6750
Fax: +1 610 866 9212
[email protected]

About Bronkhorst®

Bronkhorst specializes in low flow Mass Flow Meters & Controllers for liquids and gases. Not only instruments are provided but also complete solutions. Our global perspective with local focus ensures that our international distributor network is able to provide you on-site support at all times. Our specialist teams are available to you to fulfill the needs of pre- and aftersales support, on-site inspection & calibration and start-up assistance.