Bronkhorst offers following accessories to their product line of Mass Flow Meters, Mass Flow Controllers & Pressure Meters/Controllers:
in various porosities, for the protection of our instruments against particles.
to increase the MTBF (Mean Time Between Failure) it is important to make sure that the gas entering the instrument is clean. The COMBI-FLOW filter provides this service. The filter element can be replaced without removing the base from the pipe.
Gas Mixing Chambers
for creating homogeneous gas mixtures from percentages down to ppm-ranges.
compact local Readout/Control module for digital Mass Flow and Pressure Meters/Controllers. Modern colour TFT display for indication of measured/ totalised value, easy push-button operation, i.e. change of setpoint, counter reset, fluid selection, etc. Mounting directly on the meter/controller or on an adjacent wall/panel or on the instrument's pipework.
Plug-in Power Supply for Bronkhorst Mass Flow and Pressure Meters/Controllers. For laboratory or industrial style (IP65) instruments.
E-8000 Power Supply / Readout & Control
digital Power Supply / Readout & Control Modules for use with digital Mass Flow Meters/Controllers, Pressure Meters / Controllers and other transmitters and transducers with RS-232 communication.
E-7000 Digital Power Supply & Readout System
Advanced micro-processor based power supply / readout systems with easy
push-button and many functions, such as alarms, totalisation, reading of
actual flow and indication of fluid names.
Note: This E-7000 Series is being phased-out with the introduction of the E-8000 series and is only available for EX-FLOW applications.
Cables, connectors and other parts to complete your FLOW-BUS / Modbus / PROFIBUS / EtherCAT / PROFINET / DeviceNet system.
free software tools e.g. FlowFix, FlowDDE, FlowPlot, FlowView, etc. for installation and operation of digital mass flow meters, digital mass flow controllers and digital pressure meters/controllers.
For customer convenience, Bronkhorst offers a variety of mounting parts, e.g. mounting blocks and vibration dampeners, in order to guarantee the zero stability of (ultra) low flow Coriolis mass flow meters and controllers.