LIQUI-FLOW® series L10I / L20I
industrial style Liquid Mass Flow Meters / Controllers
General
The LIQUI-FLOW® series L10I/L20I digital Liquid Flow Meters / Controllers for low flow ranges are equipped with a rugged 'industrial style' (IP65) pc-board housing for use in industrial environments or even Zone 2 hazardous areas, due to their ATEX category 3 approval. The instruments operate on a thermal, thru-flow measuring principle. The flow meter can be connected to a control valve to form a closed control loop. The standard direct acting valve (model C2I) is normally closed, has a pressure capability of 100 bar (1500 psi) and a purge connection for easy elimination of air or gas.
- Lowest range 0,25 ... 5 g/h
- Highest range 20 ... 1000 g/h
for fluids with thermal properties similar to H2O
"Multibus" digital communication
Bronkhorst High-Tech developed their digital instruments according to the flexible "multibus" concept, due to which the instruments can be equipped with on-board interface board with DeviceNetTM, Profibus-DP®, Modbus or FLOW-BUS protocol. More information about digital "multibus" communication.
Features
- Fast and accurate measurement
- No moving parts
- Suitable for liquids with low boiling point
- Attitude insensitive
- Very small internal volume
- In combination with a control valve: continuous and stable control
- Classifications IP65 and ATEX Cat.3, Zone 2
Applications
- (Petro-)chemical installations
- Pharmaceutical industry
- Food industry (flavors, additives)
- Biotechnical industry
Flow capacities (based on H2O equivalent)
| Liquid Flow Meter |
Ranges |
| Series L13I |
min. 0,25 ... 5 g/h - max. 5 ... 100 g/h |
| Series L23I |
min. 2 ... 100 g/h - max. 20 ... 1000 g/h |
| Liquid Flow Controller |
|
Series L13I + C2I
(IP65 control valve) |
min. 0,25 ... 5 g/h - max. 5 ... 100 g/h |
Series L23I + C2I
(IP65 control valve) |
min. 2 ... 100 g/h - max. 20 ... 1000 g/h |
|  L23I industrial style Liquid Flow Meter  Industrial style Liquid Flow Controller
|
